initial

Power/Power.odin

@@ -0,0 +1,239 @@
+package power
+
+import "core:c"
+import sce "../common"
+
+foreign import power "system:ScePower_stub"
+
+@(link_prefix = "scePower")
+foreign power {
+	/**
+	* Registers a ScePower Callback
+	*
+	* @param cbid - The UID of the specified callback
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	RegisterCallback :: proc(cbid: sce.UID) -> c.int ---
+
+	/**
+	* Unregister a callback
+	*
+	* @param cbid - The UID of the specified callback
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	UnregisterCallback :: proc(cbid: sce.UID) -> c.int ---
+
+	/**
+	* Returns battery charging status
+	*
+	* @return SCE_TRUE if under charge, SCE_FALSE otherwise
+	*/
+	IsBatteryCharging :: proc() -> sce.Bool ---
+
+	/**
+	* Returns battery life percentage
+	*
+	* @return Battery life percentage
+	*/
+	GetBatteryLifePercent :: proc() -> c.int ---
+
+	/**
+	* Set power configuration mode between:
+	*
+	* Mode A - This is the normal mode at process start-up. The clock frequency of the GPU core is the "normal" clock frequency. The WLAN/COM can be used.
+	* Mode B - This mode accelerates the GPU clock frequency. The clock frequency of the GPU core is the "high" clock frequency. The WLAN/COM cannot be used.
+	* Mode C - This mode accelerates the GPU clock frequency, and also uses the WLAN/COM. The clock frequency of the GPU core is the "high" clock frequency, and use of the WLAN/COM is possible. The screen (touchscreen) brightness, however, is limited. Also, camera cannot be used.
+	*
+	* @param conf One of ::ScePowerConfigurationMode
+	*
+	* @return 0 on success
+	*/
+	SetConfigurationMode :: proc(conf: c.int) -> c.int ---
+
+	/**
+	* Check if a suspend is required
+	*
+	* @return SCE_TRUE if suspend is required, SCE_FALSE otherwise
+	*/
+	IsSuspendRequired :: proc() -> sce.Bool ---
+
+	/**
+	* Check if AC is plugged in
+	*
+	* @return SCE_TRUE if plugged in, SCE_FALSE otherwise
+	*/
+	IsPowerOnline :: proc() -> sce.Bool ---
+
+	/**
+	* Returns battery life time
+	*
+	* @return Battery life time in minutes
+	*/
+	GetBatteryLifeTime :: proc() -> c.int ---
+
+	/**
+	* Returns battery remaining capacity
+	*
+	* @return battery remaining capacity in mAh (milliampere hour)
+	*/
+	GetBatteryRemainCapacity :: proc() -> c.int ---
+
+	/**
+	* Returns battery state
+	*
+	* @return SCE_TRUE if battery is low, SCE_FALSE otherwise
+	*/
+	IsLowBattery :: proc() -> sce.Bool ---
+
+	/**
+	* Returns battery full capacity
+	*
+	* @return battery full capacity in mAh (milliampere hour)
+	*/
+	GetBatteryFullCapacity :: proc() -> c.int ---
+
+	/**
+	* Returns battery temperature
+	*
+	* @return temperature in degrees celcius * 100
+	*/
+	GetBatteryTemp :: proc() -> c.int ---
+
+	/**
+	* Returns battery voltage
+	*
+	* @return battery voltage in mV (millivolts)
+	*/
+	GetBatteryVolt :: proc() -> c.int ---
+
+	/**
+	* Returns battery state of health
+	*
+	* @return battery state of health percent
+	*/
+	GetBatterySOH :: proc() -> c.int ---
+
+	/**
+	* Returns battery cycle count
+	*
+	* @return battery cycle count
+	*/
+	GetBatteryCycleCount :: proc() -> c.int ---
+
+	/**
+	* Returns CPU clock frequency
+	*
+	* @return CPU clock frequency in Mhz
+	*/
+	GetArmClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Returns BUS clock frequency
+	*
+	* @return BUS clock frequency in Mhz
+	*/
+	GetBusClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Returns GPU clock frequency
+	*
+	* @return GPU clock frequency in Mhz
+	*/
+	GetGpuClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Returns GPU crossbar clock frequency
+	*
+	* @return GPU crossbar clock frequency in Mhz
+	*/
+	GetGpuXbarClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to do a cold reset
+	*
+	* @return always 0
+	*/
+	RequestColdReset :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to go into standby
+	*
+	* @return always 0
+	*/
+	RequestStandby :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to suspend
+	*
+	* @return always 0
+	*/
+	RequestSuspend :: proc() -> c.int ---
+
+	/**
+	* Request display on
+	*
+	* @return always 0
+	*/
+	RequestDisplayOn :: proc() -> c.int ---
+
+	/**
+	* Request display off
+	*
+	* @return always 0
+	*/
+	RequestDisplayOff :: proc() -> c.int ---
+
+	/**
+	* Sets CPU clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	SetArmClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets BUS clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	SetBusClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets GPU clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	SetGpuClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets GPU crossbar clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	SetGpuXbarClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets wireless features usage
+	*
+	* @param enabled - SCE_TRUE to enable, SCE_FALSE to disable
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	SetUsingWireless :: proc(enabled: sce.Bool) -> c.int ---
+
+	/**
+	* Gets wireless features usage
+	*
+	* @return SCE_TRUE if enabled, SCE_FALSE otherwise
+	*/
+	GetUsingWireless :: proc() -> c.int ---
+}