added kernel libraries bindings and cleaned up todos

Power/Power.odin

@@ -4,6 +4,7 @@ import "core:c"
 import sce "../common"
 
 foreign import power "system:ScePower_stub"
+foreign import powerkern "system:ScePowerForDriver_stub"
 
 @(link_prefix = "scePower")
 foreign power {
@@ -237,3 +238,216 @@ foreign power {
 	*/
 	GetUsingWireless :: proc() -> c.int ---
 }
+
+foreign powerkern {
+	/**
+	* Registers a ScePower Callback
+	*
+	* @param cbid - The UID of the specified callback
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	kscePowerRegisterCallback :: proc(cbid: sce.UID) -> c.int ---
+
+	/**
+	* Unregister a callback
+	*
+	* @param cbid - The UID of the specified callback
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	kscePowerUnregisterCallback :: proc(cbid: sce.UID) -> c.int ---
+
+	/**
+	* Returns battery charging status
+	*
+	* @return SCE_TRUE if under charge, SCE_FALSE otherwise
+	*/
+	kscePowerIsBatteryCharging :: proc() -> sce.Bool ---
+
+	/**
+	* Returns battery life percentage
+	*
+	* @return Battery life percentage
+	*/
+	kscePowerGetBatteryLifePercent :: proc() -> c.int ---
+
+	/**
+	* Check if a suspend is required
+	*
+	* @return SCE_TRUE if suspend is required, SCE_FALSE otherwise
+	*/
+	kscePowerIsSuspendRequired :: proc() -> sce.Bool ---
+
+	/**
+	* Check if AC is plugged in
+	*
+	* @return SCE_TRUE if plugged in, SCE_FALSE otherwise
+	*/
+	kscePowerIsPowerOnline :: proc() -> sce.Bool ---
+
+	/**
+	* Returns battery life time
+	*
+	* @return Battery life time in minutes
+	*/
+	kscePowerGetBatteryLifeTime :: proc() -> c.int ---
+
+	/**
+	* Returns battery remaining capacity
+	*
+	* @return battery remaining capacity in mAh (milliampere hour)
+	*/
+	kscePowerGetBatteryRemainCapacity :: proc() -> c.int ---
+
+	/**
+	* Returns battery state
+	*
+	* @return SCE_TRUE if battery is low, SCE_FALSE otherwise
+	*/
+	kscePowerIsLowBattery :: proc() -> sce.Bool ---
+
+	/**
+	* Returns battery full capacity
+	*
+	* @return battery full capacity in mAh (milliampere hour)
+	*/
+	kscePowerGetBatteryFullCapacity :: proc() -> c.int ---
+
+	/**
+	* Returns battery temperature
+	*
+	* @return temperature in degrees celcius * 100
+	*/
+	kscePowerGetBatteryTemp :: proc() -> c.int ---
+
+	/**
+	* Returns battery voltage
+	*
+	* @return battery voltage in mV (millivolts)
+	*/
+	kscePowerGetBatteryVolt :: proc() -> c.int ---
+
+	/**
+	* Returns battery state of health
+	*
+	* @return battery state of health percent
+	*/
+	kscePowerGetBatterySOH :: proc() -> c.int ---
+
+	/**
+	* Returns battery cycle count
+	*
+	* @return battery cycle count
+	*/
+	kscePowerGetBatteryCycleCount :: proc() -> c.int ---
+
+	/**
+	* Returns CPU clock frequency
+	*
+	* @return CPU clock frequency in Mhz
+	*/
+	kscePowerGetArmClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Returns BUS clock frequency
+	*
+	* @return BUS clock frequency in Mhz
+	*/
+	kscePowerGetBusClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Returns Sys clock frequency
+	*
+	* @return Sys clock frequency in Mhz
+	*/
+	kscePowerGetSysClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Returns GPU crossbar clock frequency
+	*
+	* @return GPU crossbar clock frequency in Mhz
+	*/
+	kscePowerGetGpuXbarClockFrequency :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to do a soft reset
+	*
+	* @return always 0
+	*/
+	kscePowerRequestSoftReset :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to do a cold reset
+	*
+	* @return always 0
+	*/
+	kscePowerRequestColdReset :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to go into standby
+	*
+	* @return always 0
+	*/
+	kscePowerRequestStandby :: proc() -> c.int ---
+
+	/**
+	* Requests PS Vita to suspend
+	*
+	* @return always 0
+	*/
+	kscePowerRequestSuspend :: proc() -> c.int ---
+
+	/**
+	* Request display off
+	*
+	* @return always 0
+	*/
+	kscePowerRequestDisplayOff :: proc() -> c.int ---
+
+	/**
+	* Set the screen brightness.
+	* @see ::sceAVConfigSetDisplayBrightness for userland counterpart.
+	*
+	* @param brightness Brightness that the screen will be set to (range 21-65536, 0 turns off the screen).
+	*
+	* @return ?
+	*/
+	kscePowerSetDisplayBrightness :: proc(brightness: c.int) -> c.int ---
+
+	/**
+	* Sets CPU clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	kscePowerSetArmClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets BUS clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	kscePowerSetBusClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets GPU clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	kscePowerSetGpuClockFrequency :: proc(freq: c.int) -> c.int ---
+
+	/**
+	* Sets GPU crossbar clock frequency
+	*
+	* @param freq - Frequency to set in Mhz
+	*
+	* @return 0 on success, < 0 on error
+	*/
+	kscePowerSetGpuXbarClockFrequency :: proc(freq: c.int) -> c.int ---
+}

Power/types.odin

@@ -3,7 +3,6 @@ package power
 import "core:c"
 import sce "../common"
 
-// TODO: 
 ScePowerErrorCode :: enum c.uint {
 	INVALID_VALUE           = 0x802B0000,
 	ALREADY_REGISTERED      = 0x802B0001,
@@ -15,10 +14,10 @@ ScePowerErrorCode :: enum c.uint {
 #assert(size_of(ScePowerErrorCode) == 4)
 
 ScePowerCallbackType :: enum c.uint {
-	AFTER_SYSTEM_RESUME   = 0x00000080, /* TODO: confirm */
+	AFTER_SYSTEM_RESUME   = 0x00000080,
 	BATTERY_ONLINE        = 0x00000100,
-	THERMAL_SUSPEND       = 0x00000200, /* TODO: confirm */
-	LOW_BATTERY_SUSPEND   = 0x00000400, /* TODO: confirm */
+	THERMAL_SUSPEND       = 0x00000200,
+	LOW_BATTERY_SUSPEND   = 0x00000400,
 	LOW_BATTERY           = 0x00000800,
 	POWER_ONLINE          = 0x00001000,
 	SYSTEM_SUSPEND        = 0x00010000,
@@ -27,7 +26,7 @@ ScePowerCallbackType :: enum c.uint {
 	UNK_0x100000          = 0x00100000, /* Related to proc_event::display_switch */
 	APP_RESUME            = 0x00200000,
 	APP_SUSPEND           = 0x00400000,
-	APP_RESUMING          = 0x00800000, /* TODO: confirm */
+	APP_RESUMING          = 0x00800000,
 	BUTTON_PS_START_PRESS = 0x04000000,
 	BUTTON_PS_POWER_PRESS = 0x08000000,
 	BUTTON_PS_HOLD        = 0x10000000,